Edition #106

Heirloom Project

Greene & Greene Hall Table

Part 11: Assembling the Frames

With all the parts for the front and back frames of the hall table complete, it’s time for assembly. Phil walks through the process of where to add glue and why, and then brings it all together with some key clamping techniques.

Heirloom Project

Greene & Greene Hall Table

Part 12: Completing the Base

The front and back frames need to be connected to complete the basic base of the hall table. Phil and Bryan cover the parts needed to connect the frames and show how having a helper makes the final assembly a simpler task.

Shop Project

Pull Saw Miter Box

Part 1: Pull Saw Miter Box

Dealing with small parts comes up often on all types of projects. Instead of using a power tool to cut the miters you need, you can turn to this shop-made miter box. It uses a pull saw for quick, accurate cuts.

Shop Tip

Push Pad Tray

Working at the jointer is a pretty basic task. So anything that improves the process is worth a look. This simple tray will keep your push pads close at hand so you can work more safely.

Talking Shop

Double-Sided Tape

Double-sided tape is a must-have “tool” for every shop. Here are the reasons why, the type of tape we use, and how we like to use it.

Shop Tip

Glue Cup Keeper

Keeping your work area organized goes a long way toward making project assembly easier. Take a look at this way to corral your glue and glue brush.