A Note from Don

Welcome To Woodsmith Video Edition

In every Woodsmith video edition you'll get...

A Note from Don

Introduction to the Greene & Greene Hall Table

Don provides an overview of constructing a classic Greene & Greene Hall Table.

Heirloom Project

Greene & Greene Hall Table

Part 1: Laying Out a Mortise

Accurate layouts are the key to any mortise, especially a through mortise. Watch as Don covers the process using a layout knife for accuracy. Plus, how to transfer the layout accurately to each leg of the Greene & Greene Hall Table.

Heirloom Project

Greene & Greene Hall Table

Part 2: Roughing Out a Mortise

After laying out a mortise, removing most of the waste as quickly as possible is best. The drill press and a specific drill bit are the key to great results.

Shop Project

Table Saw Outfeed Table

Part 1: Applying Laminate

An outfeed table is a must-have add-on for any table saw. Phil starts making one by cutting the parts to size and then applying laminate to the top to create a smooth, friction-free surface.

Shop Tip

Dado Blade Setup Jig

An accurate dado blade setup is critical for creating a tight joint. Check out this simple jig that makes it easy to size your dado blade for a dead-on fit.

Talking Shop

Contact Cement

Attaching laminate to a sub-base is quick and easy. Listen in as Bryan and Phil cover the keys steps to getting great results.

Shop Tip

Small Parts Carousel

Keeping track of small parts is a challenge. Here’s a simple carousel that keeps everything contained but stills provides quick and easy access.